10000mAh Power Bank with Built-in Dual Cables

Product Detailed Description

A rectangular charging block with rounded corners sits in the palm, wrapped in a smooth hard shell around the internal cell. Along the side edges, flat leads retract into narrow channels carved into the housing and held by small clips. You pull a lead free, feed the connector tip into a phone port, and push the cable back into its slot when done. The top face carries the output sockets and a small status window. Set on a desk or a counter, it rests with the cables tucked flat, so nothing dangles or snags.

• Integrated cables run along the outer casing so you plug in without reaching into a bag for a loose cord
• The flat face hosts the output ports while the rounded back sits flush against the palm when held
• A moulded connector tip sits at the cable end and plugs straight into a phone port
• When stowed, the cables lie flat against the housing sides, making the block slim enough to slide into a bag zip
• A shop counter or bedside table holds the block and connected devices while charging happens in place