Shock-Resistant TPU+PC Phone Cases with Customizable Logos

Product Detailed Description

The case is a molded phone shell with a TPU rim and a polycarbonate back panel, coated in epoxy paint across the outer face. The rim wraps the handset's sides, and the back panel joins it along an inner seam that leaves a continuous outer edge. To fit it, press the rim over the corners, work a thumb around the sidewall, and check that the camera, button and port openings sit over their matching features. The painted back forms a broad face for a logo, while the open front leaves the screen and controls within reach. On a counter or shelf, the case lies with its painted back upward.

• The back plate carries the epoxy paint across its outer face, so the rear shows color rather than a bare plastic panel
• The camera opening is cut through the back panel, so the lens sits inside a border of painted surface
• To remove the case, lift a corner, then peel the rim away from the handset rather than pulling the back plate
• A logo sits inside the outline of the back panel, so the painted edge remains visible around the mark
• A buyer stacks finished cases with the back panel down, then spreads the color options across a shelf