Airbag Anti-Drop MagSafe Phone Case

Product Detailed Description

A bumper-style phone case whose corners each flare into a pillow shape while the back panel stays flat. The shell fits over the phone frame from the rear, with side walls pressing against the rails and button openings left uncovered. A ring of magnets is set into the center of the back panel, flush with the outer surface. You align a corner, press the opposite down, then run your thumbs along each side wall until the case seats on the frame. Raised lips around the screen and camera sit above the glass, so the phone rests on the case rim when set face-down.

• Pillow-shaped corner bumpers project past the case walls so the glass clears a hard counter when the phone lies flat
• A flush magnet ring centers on the back panel so accessories dock at the same point at the rear
• A raised lip outlines the camera opening and screen rim so the front glass floats above table surfaces
• The case slides over the corners and presses against the side rails with button cutouts left open along each edge
• A flat back panel holds the magnet ring below the outer surface so the rear profile stays even in stacking trays