2-in-1 TPU and Polycarbonate Phone Case with Rhinestones

Product Detailed Description

A phone case built in layers: a soft TPU liner that holds the handset under a rigid polycarbonate frame. The liner goes on first, cutouts over the camera and ports, then the frame presses over the rim and squares the corners. Rhinestones are set into both outer faces, so the case carries decoration whether it lies screen up or screen down. Fitting one means easing the handset past the lip, then working the frame down over each corner. A shop sets it face out on a shelf, and the flat back rests on the counter while a buyer turns it in the hand.

• Cutouts at the camera and ports line up with the handset, so the lens and charging port stay open
• The stone field covers the back panel and the front border, so a buyer sees stones from the hook
• The polycarbonate frame sets the outer shape and the TPU liner nests inside it, meeting the handset directly
• A seam runs round the rim where the liner meets the frame, so a buyer can read the layered build at a glance
• A dry cloth runs along the rim and between the stones, so a retailer can wipe a handling mark off the case