Clear Acrylic and TPU Full-Protection Case with 360 Degree Magnetic Stand

Product Detailed Description

The case is a clear back shell with a soft TPU rim that wraps the sides of a handset and leaves the screen clear. The acrylic panel and TPU frame are joined along the rim, with the magnetic stand mounted on the rear. You lift the stand away from the panel, turn it to the angle you want, and set the handset on a desk. The stand lies back against the panel when the case goes into a bag. On a countertop or workbench the handset stands upright while the hands are busy with a task.

• Clear acrylic back panel shows the handset finish, so the case reads as part of the phone rather than a cover
• TPU rim gives the sides a soft edge, so fingers meet TPU rather than hard acrylic when the case is lifted
• Injection molding bonds the acrylic back to the TPU rim, so the edge runs as a continuous band rather than a joint between parts
• Metal hardware at the stand joint lets the stand swing around the back, so the handset can face you at the desk
• Camera and charging port openings leave those parts accessible, so the lens stays uncovered and a cable connects without removing the case