Street light

Product Detailed Description

This street light is built for roads, parking areas and campus perimeters that need efficient, low-maintenance output. The die-cast aluminum body houses 140pcs of Epistar LEDs, each contributing to a luminous flux of 100Lm/LED with a wide beam angle of ≥170°± 10°. A power factor above 0.92 and a constant current of 320mA/350mA keep the drive stable on an AC 220V input with DC 55V output at 50/60 HZ. White or warm white CCT covers both roadway and ambience roles, light decay is held below 1%-3%/3KH, and operation spans -20℃~ +85℃. With an IP67 rating and a life-span of ≥50000 H, plus CE certification, it is specified for years of all-weather service.

• 140pcs Epistar LEDs at 100Lm/LED in a die-cast aluminum body
• Beam angle of ≥170°± 10° for broad road coverage
• Power factor above 0.92; AC 220V input, DC 55V output, 320mA/350mA
• White/Warm White CCT and an operating range of -20℃~ +85℃
• Light decay below 1%-3%/3KH; IP67 rated; life-span ≥50000 H
• CE certified

Specifications: light source Epistar; material die-cast aluminum; LED quantity 140pcs; power factor above 0.92; input voltage AC 220V; output voltage DC 55V; constant current 320mA/350mA; frequency 50/60 HZ; beam angle ≥170°± 10°; CCT White/Warm White; operating temperature -20℃~ +85℃; luminous flux 100Lm/LED; light decay below 1%-3%/3KH; IP rate IP67; life-span ≥50000 H; certificates CE.

Logo printing is available from 100 pieces; send artwork and target quantity and receive a reply within 24 hours.